ByHeidi Kundin Updated on
This post and its photos may contain Amazon or other affiliate links. If you make a purchase through these links, I may receive a small commission at no additional cost to you.
Jump to Instructions Print Instructions
Learn how to make your own Preppy Clay Bead Bracelet set! These clay bead bracelet ideas are sure to spark some creative DIY bracelet inspiration!
This post may contain affiliate links. I will receive a small commission from these sales at no additional cost to you!
These super cute, preppy clay bead bracelets have been popular for a few years now, but with all of the friendship bracelet trading that has been happening recently at Taylor Swift’s The Eras Tour, we have seen an even bigger resurgence of their popularity lately!
Of course, friendship bracelets can be made from many, MANY different types of beads and string, but we’re especially partial to these clay beads (also known as heishi beads) because they have more of a refined appearance and are perfect for everyday wear (for all ages!)! Long after the Taylor Swift concert is over and done with, these clay bead bracelets will still reign supreme in your wardrobe!
Today, I’ll walk you step-by-step through the process of creating these clay beaded bracelets and share the patterns for FIVE different preppy clay bead bracelet ideas that you are going to want to make ASAP!
You May Also Like/Learn More Here:
25+ DIY Friendship Bracelet Ideas
How to Make Paracord Bracelets
TABLE OF CONTENTS
DIY Preppy Clay Bead Bracelets
These clay bead bracelets don’t require many supplies, and they don’t take long to make, so you will most definitely end up wanting to make a bunch of them – it’s SO fun, and no one can resist a wrist full of “arm candy!”
Supplies Needed for Preppy Clay Bead Bracelets:
- Clay Beads (6mm) in assorted colors
- Elastic Beading Cord
- Washi Tape (Scotch Magic Tape also works well!)
- Assorted Spacer Beads
- Super Glue Gel or GS Hypo Cement
How to Make Clay Bead Bracelets
1. Starting the Bracelet
To begin, cut a length of stretchy cord that is approximately 10″ long.
Heidi’s Handy Tip:
To make quick work of measuring, I like to add a piece of washi tape to my desk that is 7″ long, which is the length that I will make all of my beading. Simply extend the cord about 1.5″ from each end of the washi tape and then cut.
Grip the ends of the cord and pull to stretch. Pre-stretching the cord will allow you to tie tighter knots at the end!
Add a small piece of washi tape to the end of the elastic cording, and fold the tape back on itself. This will create a barrier so that your beads don’t slip off the end of the cord.
2. Beading the Bracelet
Following the patterns below, add beads to the bracelet string until it reaches the desired length.
Again, you can use that handy strip of washi tape to easily measure the length at a glance!
3. How to Tie a Clay Bead Bracelet
My favorite way to tie clay bead bracelets is with a surgeon’s knot. It’s quite simple to do, and it holds better than a typical square knot.
Follow the video above: tie a half-knot, then another half-knot (do NOT pull the second half-knot tight yet!). Loop each tail through one more time, and then pull tightly.
Preppy Clay Bead Bracelet Patterns
This set of preppy clay bread bracelets contains five different patterns, all made using the same basic color palette. I used white clay beads along with 10 different sunset-hued colors including light and dark shades of purple, pink, coral, and golden yellow, as well as gold spacer beads and gold hearts.
Bracelet 1 – Random Mix
The first bracelet here is the easiest to make because it doesn’t require much thought! The whole point of this bracelet is that the bead colors and order are totally random, so it’s extra easy peasy!
In a small dish, mix together about 100 white clay beads and 5-10 beads each of several different sunset-hued colors (about 40-50 beads total). You want the mixture to be approximately 2/3 white and 1/3 colored.
String the beads as follows:
- 15-16 Clay Beads (any color!)
- Gold Flat Spacer
- 3 Clay Beads (again, any color)
- Gold Flat Spacer
Then, repeat the pattern until you reach the desired length. For my 7″ bracelet, I repeated the pattern six times.
Bracelet 2 – White with Colored Bands and Hearts
For this heart bracelet, I used 80 white clay beads, 34 colored clay beads, two faceted gold spacers, and three gold hearts.
String the beads as follows:
- 5 White Clay Beads
- 2 Colored Clay Beads (any color from the palette)
- Repeat the white/colored pattern 8 times
- Faceted Spacer
- 3 Gold Hearts
- Faceted Spacer
- 2 Colored Clay Beads
- 5 White Clay Beads
- Repeat the pattern until the desired length is reached
Bracelet 3 – Sunset with Gold Bands
For this bracelet, I used 80 white clay beads, 26 colorful clay beads (in 7 colors), and 18 flat gold spacers.
String the beads as follows:
- 40 White Clay Beads
- 3 Flat Gold Spacers
- 2 Clay Beads, Color #1
- Flat Gold Spacer
- Repeat the 2 Clay Beads, 1 Flat Gold Spacer pattern for Colors #2-7
- Then, repeat the pattern in reverse color order for Colors #6-1.
- 3 Flat Gold Spacers
- 40 White Clay Beads
Bracelet 4 – Color Blocked
For this fun color-blocked bracelet, I used 24 white clay beads, 10 colored clay beads in each of 8 different colors (you may need to adjust this number slightly depending on the length desired), and 18 flat gold spacer beads.
String the beads as follows:
- 10-12 Colored Clay Beads (Color #1)
- Flat Gold Spacer
- 3 White Clay Beads
- Flat Gold Spacer
- Repeat the pattern for Colors #2-8
Bracelet 5 – Sunset Ombré
This pretty bracelet mimics the shifting colors of the setting sun, and it’s one of my favorites!
To make this one, I used 15 beads each of white as well as eight different colors – light and dark versions of purple, pink, coral, and golden yellow.
String the beads as follows:
- 3 Clay Beads of Color #1
- Repeat for Colors #2-8
- Repeat the entire color pattern (colors #1-8) four more times or until the desired length is reached
Frequently Asked Questions About Clay Bead Bracelets
How long should my clay beaded bracelet be?
The most common women’s bracelet length is 7 inches long, however, the standard range is anywhere from 6 to 8.5 inches. For best results, use a soft tape measure to measure your wrist, and then add 1/4 inch to the length.
Children’s bracelets typically range from 5 to 6.5 inches; men’s range from 7.5 inches to 10.5 inches.
How many clay beads do I need to make a bracelet?
To make a standard 7″ adult bracelet, you will need around 100-140 flat clay beads per bracelet, depending on the thickness of each clay bead (you will notice that some are thinner-cut than others). If you are weighing out the number of beads, you will need around 5 grams of clay beads per bracelet.
If you include any additional letter beads, spacers, or decorative beads, you will need fewer clay beads.
What is the best string to use for clay bead bracelets?
We recommend using a clear stretchy beading cord that is between .4mm and 1mm thick. Stretch Magic is a popular brand of jewelry cord that we use frequently.
Which clay beads are the best for bracelets?
You can find all of my favorite clay beads and bracelet supplies in my Amazon Shop!
How do I keep my clay beaded bracelet from untying or breaking?
Follow the step-by-step video demonstration above to tie your bracelets using a surgeon’s knot, which creates one of the strongest and tightest knots possible when working with stretchy jewelry cords. Adding a dab of glue to the knot can add an extra layer of security.
When pulling the knot tight, you’ll want to be gentle so as not to overstretch the cord, which can weaken it and may lead to potential breakage.
Are clay bead bracelets waterproof?
Yes! Clay beads are made from cured polymer clay or vinyl material which are durable and waterproof materials; however, due to other chemicals and components often found in pools and other bodies of water, we still recommend that you remove your bracelets before swimming or bathing for the best results and longevity.
So, now that you have all the details, it’s time for you to start making your own preppy clay bead bracelets! If you make your own, don’t forget to tag me on Instagram @HeidiKundin or use the hashtag #HIHMakersClub so I can check them out!
Happy crafting!
How to Make Clay Bead Bracelets
Learn how to make your own Preppy Clay Bead Bracelet set! These clay bead bracelet ideas are sure to spark some creative DIY bracelet inspiration!
5 from 1 vote
Print Pin Rate
Active Time: 20 minutes minutes
Total Time: 20 minutes minutes
What You’ll Need:
Instructions:
To begin, cut a length of stretchy cord that is approximately 10" long.
Tip: to make quick work of measuring, I like to add a piece of washi tape to my desk that is 7" long, which is the length that I will make all of my beading. Simply extend the cord about 1.5" from each end of the washi tape and then cut.
Grip the ends of the cord and pull to stretch. Pre-stretching the cord will allow you to tie tighter knots at the end!
Add a small piece of washi tape to the end of the elastic cording, and fold the tape back on itself. This will create a barrier so that your beads don't slip off the end of the cord.
Following the patterns as shown in the blog post, add beads to the bracelet string until it reaches the desired length.
(Again, you can use that handy strip of washi tape to easily measure the length at a glance!)
To finish the bracelet, tie a surgeon's knot as demonstrated in the video. Ttie a half-knot, then another half-knot (do NOT pull the second half-knot tight yet!). Loop each tail through one more time, and then pull tightly.
Add a small dab of glue to help secure the knot, and then allow the glue to dry completely before trimming off the ends of the cord.
Did You Make This?Mention @HeidiKundin or tag #hihmakersclub on Instagram to show off your awesome work! ♥
Check Out These Other DIY Jewelry Making Ideas!
- Easy DIY Valentine’s Day Bracelets
- 435+ Taylor Swift Friendship Bracelet Ideas
- Easy DIY Teacher Bracelet Set
- 25+ DIY Friendship Bracelet Ideas
- Laser Cut Wood Earrings with Cork Inlay
- DIY Rainbow Macramé Earrings
- Easy DIY Resin Hair Clips
Don’t Forget to Pin These Clay Bead Bracelets for Later!
Heidi Kundin( Owner & Creative Director )
Heidi Kundin has captivated the hearts of millions with her colorful and inspiring approach to crafting, celebrations, and family fun. With over 15 years of experience, Happiness is Homemade has become a must-visit destination for those seeking quick and easy creative ideas and last-minute solutions. Heidi’s warm personality shines through her posts, inviting readers to join her on a creative journey that’s fun, rewarding, and achievable. Heidi is also the author of Homemade Bath Bombs & More and DIY Tie-Dye.
Insights, advice, suggestions, feedback and comments from experts
As an expert and enthusiast, I have personal experiences or opinions. However, I can provide you with information related to the concepts used in this article.
Clay Bead Bracelets
Clay bead bracelets are a popular DIY accessory that can be made using various types of clay beads, also known as heishi beads. These bracelets have a refined appearance and are suitable for everyday wear for all ages. They have gained even more popularity due to the trend of friendship bracelet trading, especially at events like Taylor Swift's The Eras Tour.
Supplies Needed for Preppy Clay Bead Bracelets:
To make clay bead bracelets, you will need the following supplies:
- Clay Beads (6mm) in assorted colors: These beads are available in various colors and add a pop of color to the bracelets.
- Elastic Beading Cord: A stretchy cord is used to string the beads together and create the bracelet.
- Washi Tape: Washi tape can be used to measure the length of the bracelet and create a barrier to prevent beads from slipping off.
- Assorted Spacer Beads: Spacer beads are used to add visual interest and separate the clay beads.
- Super Glue Gel or GS Hypo Cement: These adhesives can be used to secure the knot and add extra durability to the bracelet.
How to Make Clay Bead Bracelets:
The process of making clay bead bracelets involves a few simple steps:
- Starting the Bracelet: Cut a length of stretchy cord, approximately 10" long. Pre-stretch the cord to tie tighter knots later. Use washi tape to mark the desired length and create a barrier at one end of the cord.
- Beading the Bracelet: Follow the patterns provided in the article to add the clay beads and spacer beads to the cord. You can use the washi tape to measure the length of the bracelet.
- How to Tie a Clay Bead Bracelet: Use a surgeon's knot to secure the bracelet. Tie a half-knot, then another half-knot without pulling it tight. Loop each tail through one more time and pull tightly. Add a small dab of glue to secure the knot and let it dry before trimming the ends of the cord.
Preppy Clay Bead Bracelet Patterns:
The article provides five different preppy clay bead bracelet patterns. Each pattern uses a combination of white clay beads, colored clay beads, spacer beads, and other decorative elements. The patterns include:
- Random Mix: A bracelet with a random mix of white clay beads and colored beads.
- White with Colored Bands and Hearts: A bracelet with white clay beads, colored clay beads, faceted gold spacers, and gold hearts.
- Sunset with Gold Bands: A bracelet with white clay beads, colored clay beads in a sunset color palette, and flat gold spacers.
- Color Blocked: A bracelet with white clay beads, colored clay beads in different colors, and flat gold spacer beads.
- Sunset Ombré: A bracelet with white clay beads and a shifting color pattern resembling a sunset.
Frequently Asked Questions About Clay Bead Bracelets:
The article also addresses common questions about clay bead bracelets, including:
- How long should my clay beaded bracelet be?
- How many clay beads do I need to make a bracelet?
- What is the best string to use for clay bead bracelets?
- Which clay beads are the best for bracelets?
- How do I keep my clay beaded bracelet from untying or breaking?
- Are clay bead bracelets waterproof?
The article provides answers and recommendations for each of these questions.
I hope this information helps you understand the concepts and techniques involved in making clay bead bracelets!
